Paper jammed, Prepare a cartridge, Set the correct authentication information – Canon imageCLASS MF275dw Wireless All-In-One Monochrome Laser Printer User Manual

Page 581: Set the information necessary for authentication

Advertising
background image

Paper jammed.

Paper jammed in the machine during printing.

Remove the Jammed Paper, and If Printing Does Not Resume Automatically, Try Printing Again.

Paper Jams(P. 487)

Prepare a cartridge.

It is nearing the time to replace the toner cartridge.

Prepare New Toner Cartridge, and Replace the Old Ones, as Needed.

When printing large jobs, it is recommended to replace the toner cartridge. Replacing the Toner

Cartridge(P. 471)

To Continue Printing, Use the Procedure Below.

When Faxing, or Printing an Auto Report
In the following cases, the data may be saved to the memory of the machine without being printed to

prevent printing text that is difficult to read or images that are difficult to see:

When receiving a Fax

When communication results reports are set to be printed automatically

To continue printing, enable [Continue Printing When Amount in Cartridge Is Low].

Log in to Remote UI [Settings/Registration] [RX/Forwarding Settings] or [RX Settings] [Common
Settings] [Edit] in [Common Settings] select the [Continue Printing When Amount in Cartridge Is
Low] checkbox [OK]

On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to

configure the settings. [Displ. Timing for Cartridge Prep. Notif.](P. 382)

* When this setting is enabled, the printing results may be light or faded.

You can manually specify when this message appears (when toner is low). [Displ. Timing for Cartridge
Prep. Notif.](P. 382)

Set the correct authentication information.

The authentication method or authentication information of IEEE 802.1X is not set correctly.

Set the Authentication Method and Authentication Information (Keys and Certificates, Password, CA

Certificate) Correctly.

Setting IEEE 802.1X(P. 313)

Managing and Verifying a Key and Certificate(P. 315)

Set the information necessary for authentication.

The authentication method or authentication information of IEEE 802.1X is not set correctly.

Set the Authentication Method and Authentication Information (Keys and Certificates, Password, CA

Certificate) Correctly.

Setting IEEE 802.1X(P. 313)

Managing and Verifying a Key and Certificate(P. 315)

Troubleshooting

572

Advertising