Freescale Semiconductor ColdFire MCF52210 - Manual (Page 101)

Clock Module
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 6-7
6.7.1.1 Synthesizer Control Register (SYNCR)
IPSBAR
Offset: 0x12_0000 (SYNCR)
Access: Supervisor read/write
15 14 13 12 11 10 9 8
R
LOLRE MFD2 MFD1 MFD0 LOCRE RFD2 RFD1 RFD0
W
Reset 0 0 0 1 0 0 0 0
7 6 5 4 3 2 1 0
R
LOCEN DISCLK FWKUP — — CLKSRC
1
1
The reset value of PLLEN and CLKSRC depend on the value of CLKMOD1 during reset (set to 1 if PLL is
enabled when the device emerges from reset).
PLLMODE PLLEN
1
W
Reset 0 0 0 0 0 0 1 0
Figure 6-2. Synthesizer Control Register (SYNCR)
Table 6-5. SYNCR Field Descriptions
Field Description
15
LOLRE
Loss-of-lock reset enable. Determines how the system manages a loss-of-lock indication. When operating
in normal mode or 1:1 PLL mode, the PLL must be locked before setting the LOLRE bit. Otherwise, reset
is immediately asserted. To prevent an immediate reset, the LOLRE bit must be cleared before writing the
MFD[2:0] bits or entering stop mode with the PLL disabled.
0 No reset on loss of lock
1 Reset on loss of lock
Note: In external clock mode, the LOLRE bit has no effect.