Freescale Semiconductor ColdFire MCF52210 - Manual (Page 283)

DMA Controller Module
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 17-9
27–25
BWC
Bandwidth control. Indicates the number of bytes in a block transfer. When the byte count reaches a multiple of
the BWC value, the DMA releases the bus.
24-23 Reserved, should be cleared.
22
SINC
Source increment. Controls whether a source address increments after each successful transfer.
0 No change to SAR after a successful transfer.
1 The SAR increments by 1, 2, 4, or 16, as determined by the transfer size.
21–20
SSIZE
Source size. Determines the data size of the source bus cycle for the DMA control module.
00 Longword
01 Byte
10 Word
11 Line (16-byte burst)
19
DINC
Destination increment. Controls whether a destination address increments after each successful transfer.
0 No change to the DAR after a successful transfer.
1 The DAR increments by 1, 2, 4, or 16, depending upon the size of the transfer.
18–17
DSIZE
Destination size. Determines the data size of the destination bus cycle for the DMA controller.
00 Longword
01 Byte
10 Word
11 Line (16-byte burst)
16
START
Start transfer.
0 DMA inactive
1 The DMA begins the transfer in accordance to the values in the control registers. START is cleared
automatically after one system clock and is always read as logic 0.
Table 17-4. DCRn Field Descriptions (continued)
Field Description
BWC Number of kilobytes per block
000 DMA has priority and does not negate
its request until transfer completes.
001 16 Kbytes
010 32 Kbytes
011 64 Kbytes
100 128 Kbytes
101 256 Kbytes
110 512 Kbytes
111 1024 Kbytes