Freescale Semiconductor ColdFire MCF52210 - Manual (Page 89)

Multiply-Accumulate Unit (MAC)
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 4-13
if (MACSR.OMC == 0 || MACSR.V == 0)
then {
MACSR.V = 0
/* select the input operands */
if (sz == word)
then {if (U/Ly == 1)
then operandY[31:0] = {0x0000, Ry[31:16]}
else operandY[31:0] = {0x0000, Ry[15:0]}
if (U/Lx == 1)
then operandX[31:0] = {0x0000, Rx[31:16]}
else operandX[31:0] = {0x0000, Rx[15:0]}
}
else {operandY[31:0] = Ry[31:0]
operandX[31:0] = Rx[31:0]
}
/* perform the multiply */
product[63:0] = operandY[31:0] * operandX[31:0]
/* check for product overflow */
if (product[63:32] != 0x0000_0000)
then { /* product overflow */
MACSR.V = 1
if (inst == MSAC && MACSR.OMC == 1)
then result[31:0] = 0x0000_0000
else if (MACSR.OMC == 1)
then /* overflowed MAC,
saturationMode enabled */
result[31:0] = 0xffff_ffff
}
/* scale product before combining with accumulator */
switch (SF) /* 2-bit scale factor */
{
case 0: /* no scaling specified */
break;
case 1: /* SF = “<< 1” */
if (product[31] == 1)
then {MACSR.V = 1
if (inst == MSAC && MACSR.OMC == 1)
then result[31:0] = 0x0000_0000
else if (MACSR.OMC == 1)
then /* overflowed MAC,
saturationMode enabled */
result[31:0] = 0xffff_ffff
}
else product[31:0] = {product[30:0], 0}
break;
case 2: /* reserved encoding */
break;
case 3: /* SF = “>> 1” */
product[31:0] = {0, product[31:1]}
break;
}
/* combine with accumulator */
if (MACSR.V == 0)