Freescale Semiconductor ColdFire MCF52210 - Manual (Page 446)

Analog-to-Digital Converter (ADC)
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
26-10 Freescale Semiconductor
26.4.5 Sample Disable Register (ADSDIS)
This register is an extension to the ADLST1and ADLST2, providing the ability to enable only the desired
samples programmed in the SAMPLE0–SAMPLE7. At reset, all samples are enabled. For example, if in
sequential mode and bit DS5 is set to 1, SAMPLE0 through SAMPLE4 are sampled. However, if in
parallel mode and bits DS5 or DS1 are set to 1, only SAMPLE0 and SAMPLE4 are sampled.
Table 26-8. ADLST2 Field Descriptions
Field Description
15 Reserved, should be cleared.
14–12
SAMPLE7
Sample input channel select 7. The settings for this field are given in Table 26-9 .
11 Reserved, should be cleared.
10–8
SAMPLE6
Sample input channel select 6. The settings for this field are given in Table 26-9 .
7 Reserved, should be cleared.
6–4
SAMPLE5
Sample input channel select 5. The settings for this field are given in Table 26-9 .
3 Reserved, should be cleared.
2–0
SAMPLE4
Sample input channel select 4. The settings for this field are given in Table 26-9 .
Table 26-9. ADC Input Conversion for Sample Bits
SAMPLEn[2:0]
ADC Input Pins Selected
Sequential Mode Parallel Mode
n=0,1,2,...,7 n=0,1,2,3
(Conv. A)
n=4,5,6,7
(Conv. B)
Single Ended Differential
000 000 AN0 AN0+, AN1–
001 001 AN1
010 010 AN2 AN2+, AN3–
011 011 AN3
100 100 AN4 AN4+, AN5–
101 101 AN5
110 110 AN6 AN6+, AN7–
111 111 AN7