Freescale Semiconductor ColdFire MCF52210 - Manual (Page 179)

System Control Module (SCM)
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 12-3
12.5 Register Descriptions
12.5.1 Internal Peripheral System Base Address Register (IPSBAR)
The IPSBAR specifies the base address for the 1-Gbyte memory space associated with the on-chip
peripherals. At reset, the base address is loaded with a default location of 0x4000_0000 and marked as
valid (IPSBAR[V]=1). If desired, the address space associated with the internal modules can be moved by
loading a different value into the IPSBAR at a later time.
0x002C Peripheral Access Control Register (PACR8) 8 R/W 0x00 12.7.3.2/12-14
0x0030 GPACR0 Register 8 R/W 0x00 12.7.3.3/12-16
0x0031 GPACR1 Register 8 R/W 0x00 12.7.3.3/12-16
1 Addresses not assigned to a register and undefined register bits are reserved for expansion.
2 The PPMRH, LPICR, PMRL, PPMRS, PPMRC, and IPSBMT are described in Chapter 8, “Power Management.”
3
Register must be addressed as a byte.
Table 12-2. Accessing as 32-Bit Registers
IPSBAR
Offset
[31:24] [23:16] [15:8] [7:0]
0x0000 IPSBAR
0x0004 —
0x0008 RAMBAR
0x000C PPMRH
1
1 The LPICR is described in Chapter 8, “Power Management.”
0x0010 CRSR CWCR LPICR
1
CWSR
0x0014 DMAREQC
2
2
The DMAREQC register is described in Chapter 17, “DMA Controller Module .”
0x0018 PPMRL 1
0x001C MPARK
0x0020 MPR PPMRS 1 PPMRC 1 IPSBMT 1,3
3
Register must be addressed as a byte.
0x0024 PACR0 PACR1 PACR2 PACR3
0x0028 PACR4 PACR5 PACR6 PACR7
0x002C PACR8 — — —
0x0030 GPACR0 GPACR1 — —
0x0034 — — — —
0x0038 — — — —
0x003C — — — —
Table 12-1. SCM Register Map (continued)
IPSBAR
Offset
1
Register
Width
(bits)
Access Reset Value Section/Page