Freescale Semiconductor ColdFire MCF52210 - Manual (Page 275)

MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 17-1
Chapter 17
DMA Controller Module
17.1 Introduction
This chapter describes the direct memory access (DMA) controller module. It provides an overview of the
module and describes in detail its signals and registers. The latter sections of this chapter describe
operations, features, and supported data transfer modes in detail.
NOTE
The designation n is used throughout this section to refer to registers or
signals associated with one of the four identical DMA channels: DMA0,
DMA1, DMA2, or DMA3.
17.1.1 Overview
The DMA controller module enables fast transfers of data, providing an efficient way to move blocks of
data with minimal processor interaction. The DMA module, shown in
Figure 17-1 , has four channels that
allow byte, word, longword, or 16-byte burst data transfers. Each channel has a dedicated source address
register (SARn), destination address register (DARn), byte count register (BCRn), control register
(DCRn), and status register (DSRn). Transfers are dual address to on-chip devices, such as UART and
GPIOs.