4 interrupt request level register (irlrn), 4 interrupt request level register (irlr n ) – Freescale Semiconductor ColdFire MCF52210 User Manual
Page 220
Interrupt Controller Module
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
14-10
Freescale Semiconductor
14.3.4
Interrupt Request Level Register (IRLRn)
This 7-bit register is updated each machine cycle and represents the current interrupt requests for each
interrupt level, where bit 7 corresponds to level 7, bit 6 to level 6, etc.
14.3.5
Interrupt Acknowledge Level and Priority Register (IACKLPRn)
Each time an IACK is performed, the interrupt controller responds with the vector number of the highest
priority source within the level being acknowledged. In addition to providing the vector number directly
for the byte-sized IACK read, this 8-bit register is also loaded with information about the interrupt level
and priority being acknowledged. This register provides the association between the acknowledged
physical interrupt request number and the programmed interrupt level/priority. The contents of this
read-only register are described in
IPSBAR
Offset: 0x0C18 (IRLRn)
Access: Read-only
7
6
5
4
3
2
1
0
R
IRQ[7:1]
0
W
Reset:
0
0
0
0
0
0
0
0
Figure 14-7. Interrupt Request Level Register (IRLRn)
Table 14-9. IRLRn Field Descriptions
Field
Description
7–1
IRQ
Interrupt requests. Represents the prioritized active interrupts for each level.
0 There are no active interrupts at this level
1 There is an active interrupt at this level
0
Reserved
IPSBAR
Offset: 0x0C19 (IACKLPRn)
Access: Read-only
7
6
5
4
3
2
1
0
R
0
LEVEL
PRI
W
Reset:
0
0
0
0
0
0
0
0
Figure 14-8. IACK Level and Priority Register (IACKLPRn)