Removing the lower housing assembly – ZOLL M Series Defibrillator Rev R User Manual
Page 112
Advertising
M Series Service Manual
102
11. Removing
the Lower
Housing
Assembly
Tools Required
• #2 Phillips screwdriver
Setup
• Remove all power sources, such as the
battery and power cord.
To reinstall the Lower House Assembly, reverse
the steps.
Step 1: Remove the paper tray by pulling it out
and pressing the locking tab upwards at the rear of
the tray.
Step 2: Remove the screw at the bottom of the
unit to remove the PCMCIA FAX/Modem card’s
plastic protector.
Step 3: Remove the remaining screws from the
bottom of the unit.
Step 4: Lift the lower housing assembly straight
up and out from the unit
Advertising