ZOLL M Series Defibrillator Rev R - Manual (Page 61)

M Series Service Manual
51
24.0 Bluetooth Test
Tools Needed: USB Bluetooth dongle with driver CD, Bluetooth application software BlueSoleil.
Test Setup: Verify that the M Series unit is configured as follows: Bluetooth INSTALLED, and Baud Rate set to 115200 or 38400.
Do this... Verify that... Pass/
Fail
24.1 Power up the M Series unit while
pressing in and holding the left-
most softkey. The M Series unit displays the System Utilities Menu. o o
24.2 Insert a PCMCIA card containing
data into the card reader.
24.3 Press the UPLOAD CARD
softkey, then press the softkey
UPLOAD CARD. Verify that the Bluetooth LED is on and displays a green
light. o o
24.4 Press the SEND softkey.
24.5 Double click on the HyperTerminal
shortcut (BT115200) from the
desktop.
Note: If setting up Hyperterminal
for the first time set COM
PORT programmed for
Bluetooth adapter,
115200bps, 8, N, 1, N
24.6 Start Bluetooth Utility software
(Blue Soleil) on the computer.
24.7 In the IVT Corporation Blue Soleil
window under “View”, select
refresh devices.