ZOLL M Series Defibrillator Rev R - Manual (Page 115)

M Series Service Manual
105
14. Removing
the
Paddle
Release
Latch
Tools Required
• #2 Phillips screwdriver
• Exacto-Knife
• Upper Latch Seal (9330-0304)
Setup
1. Remove the Front Panel Assembly.
2. Remove the Upper Housing Assembly.
To reinstall the Paddle Release Latch, reverse
the steps.
Step 1: Using the Exacto Knife, remove the
adhesive seal on the unit’s chassis .
Step 2: Insert the screwdriver into the opening
under the adhesive seal.
Step 3: Gently push the screwdriver until the
Paddle Release Latch is dislodged. Step 4: Pull Paddle Release button away from the
unit.