ZOLL M Series Defibrillator Rev R - Manual (Page 83)

M Series Service Manual
73
USE PADS (AUTO DEFIB MODE ONLY.)
Attempt to defib with paddles in auto defib (AED)
mode. Defib only allowed using PADS in AED
modes.

USE PADS TO PACE External paddles detected in pace mode.

USE ROOM AIR
ADAPTER
Adapter zeroing started with EtCO
2
in the adapter or
the adapter is on the REF or “0” cell.
 Place CO
2
sensor on
adapter in room air.
USER SETUP REQ Both copies of stored cal/config data are bad or have
never been programmed.

Perform configuration
setup.
VF ALARMS OFF VF alarms disabled in pace mode or when paddles
are selected as leads.

VX LEADS OFF V lead not properly attached to patient. “X” denotes
lead number.
 Reattach V lead.
ZERO CO
2
SENSOR New EtCO
2
sensor needs to be zero calibrated.  Zero EtCO
2
sensor.
ZERO CO
2
ADAPTER New EtCO
2
airway adapter needs to be zero
calibrated.
 Zero EtCO
2
adapter.
Error Message Explanation
User
Advisory
Technical Action