Removing the print head assembly – ZOLL M Series Defibrillator Rev R User Manual
Page 113
Advertising
M Series Service Manual
103
12. Removing
the Print
Head
Assembly
Tools Required
• #1 Phillips screwdriver
Setup
• Remove the Lower Housing Assembly.
To reinstall the Print Head Assembly, reverse the
steps.
Step 1: Remove two screws from the paper tray
guide and remove the paper tray guide.
Step 2: Disconnect the ribbon cable from the
print head.
Step 3: Remove the pivot pin for re-use.
ribbon cable
print head
print head
pivot pin
Advertising