Buhler 2180 User Manual
Page 113
SECTION 2 - OPERATION
2-67
ENGINE SHUTDOWN OVERRIDE
An automatic engine shutdown feature will shut
down the engine within 30 seconds if engine oil
pressure falls below or engine coolant temperature
rises above predetermined levels. The engine will
also shut down after 30 seconds if the transmission
low pressure lamp or the transmission high
temperature lamp illuminates, as shown on page
2-16.
Before shutdown occurs, the word “STOP” will flash
in the instrument control center display and a
pulsating tone will sound.
The override switch, 1, is provided to allow the
operator to override the automatic shutdown.
The switch should only be used to move the tractor
to a safe area for investigation and repair.
Push the top of the switch to override the shutdown
system. The top of the switch will illuminate when the
switch is activated.
Push the bottom to return to normal automatic
shutdown operation.
IMPORTANT: Determine and correct the cause of
the shutdown before resuming operation.
WARNING
The engine shutdown feature is fully automatic.
It can be overridden by the operator to drive the
tractor to a safe location. The override switch
should only be used to move the tractor far
enough to avoid a dangerous situation, such as
traffic.
102