Buhler 2180 - Manual (Page 48)

SECTION 2 - OPERATION
2-2
CAB
INTRODUCTION
The cab has been designed for operator comfort and
convenience. Inside, the walls, roof, and floor are
insulated to reduce noise to a minimum.
Standard features include two doors, a fresh air
heater/defroster, air-conditioning, tinted glass, interi-
or lights, assist rails, cigar lighter, ashtray, storage
box and an air suspension seat.
ENTERING THE CAB
The cab may be entered from the right or left side.
To enter the cab, face a door, 1, then open it. Grasp
the “A” post assist rail, 2, and the door assist rail, 3.
Place one foot on the lowest step plate, 4. Use the
assist rails to climb the steps. Enter the cab, close the
door, sit in the seat, and fasten the seat belt.
To exit the cab, release the seat belt, open the door,
grasp the assist rails, back out of the cab and
descend the steps using the assist rails.
1
DOORS
Each door has an external handle, 1, with a push
button, 2. The door may be locked from the outside
by using the start/stop switch key. Insert the key in the
slot in the push button. Rotate the key to lock or
unlock the door.
To open a door from the outside, push in on the button
and pull out on the handle.
2