Buhler 2180 - Manual (Page 279)

SECTION 5 - SPECIFICATIONS
5-7
Maximum Static Downward Load 2145 2160 2180 2210
Rear drawbar hole kg 2449 2750 2750 2750
(lbs) (5400) (6000) (6000) (6000)
Center drawbar hole kg 2086 2131 2131 2131
(lbs) (4600) (4700) (4700) (4700)
Forward drawbar hole kg 1587 1770 1770 1770
(lbs) (3500) (3900) (3900) (3900)
HYDRAULIC SYSTEM
Type Closed center load sensing (CCLS)
Nominal System Pressure bar ± 3.0 200 200 200 200
(PSI ± 50) (2900) (2900) (2900) (2900)
Hydraulic Pump Variable displacement axial piston pump
Flow at Rated Engine Speed
Standard L/min 117 117 117 117
(US gal/min) (31.0) (31.0) (31.0) (31.0)
HydraFlow Plus (option) L/min 208 208 208 208
(US gal/min) (55.0) (55.0) (55.0) (55.0)
Remote Control Valves
Max Flow Capacity at
One Coupler
Standard Pump L/min ± 8 102 102 102 102
(US gal/min± 2) (27) (27) (27) (27))
HydraFlow Plus Pump L/min ± 8 102 102 102 102
(US gal/min± 2) (27) (27) (27) (27)
THREE-POINT LIFT
Linkage Cat III Cat III Cat III Cat III
Category Adaptor Yes Yes Yes Yes
Lift Capacity kg 5670 5670 5670 6804
(lbs) (12500) (12500) (12500) (15000)
BRAKES
Type Inboard Inboard Inboard Inboard
wet wet wet wet
Disc Diameter OD-ID mm 368 - 305 368 - 305 368 - 305 368 - 305
(in) (14.5 - 12.0) (14.5 - 12.0) (14.5 - 12.0) (14.5 - 12.0)
No. of Discs (total) 4 4 4 4
Self Adjusting yes yes yes yes
Parking Brake Rear axle - oil immersed 3 disc