Buhler 2180 - Manual (Page 90)

SECTION 2 - OPERATION
2-44
BRAKES
FOOT BRAKES
All tractors are equipped with hydraulic assisted
self-adjusting power brakes. The hydraulic assist
only functions with the engine running. With the
engine off, the brakes will still function but with higher
pedal effort. Use both parking brake and foot brakes
to stop with the engine not running.
CAUTION
Use caution when towing loads at transport
speeds. Reduce speed if towed load weighs
more than the tractor and is not equipped with
brakes. Avoid hard braking applications. (Con-
sult the implement operator’s manual for
recommended transport speeds.)
The foot brakes may be operated independently to
aid turning or together for normal stopping. When
operating in the field it is advised that the brake
pedals be unlocked.
WARNING
Always lock the brakes together when traveling
on the highway. Never use the brakes to aid
turning at high speed.
To lock the brake pedals together, swing the lock
plate, 1, into the slot on the right foot brake pedal, 2.
To unlock the brake, position the plate, 1, into the slot
on the left pedal, 3.
The rear fender brake lights will be illuminated when
both brakes are applied.
Periodically test brake pedals with the engine
stopped to make sure manual brake system is
functioning.
Never ride the brakes by resting a foot on the pedals.
This causes unnecessary wear on the brakes.
Tractors equipped with FWD will automatically
engage the four wheel drive for improved braking
when both pedals are depressed.
72