Buhler 2180 User Manual
Page 263
4-1
SECTION 4 - TROUBLESHOOTING
TROUBLESHOOTING AND FAULT FINDING
INTRODUCTION
The following information is intended as a guide to
assist in identifying and correcting possible tractor
malfunctions and fault conditions.
Information is divided into three headings:
OPERATOR PROMPTS
FAULT CODES
SYSTEM TROUBLESHOOTING
OPERATOR PROMPTS
Operator prompts, 1, indicate that an operational
procedure has been performed out of sequence.
The “prompts” are meant to advise the operator to
take correct action.
The following flashing prompts will be displayed on
the Electronic Instrument Cluster (EIC) gear shift
display.
70-550-357
1
PROMPT
CAUSE
CORRECTION
F
Gear shift lever in forward while starting
Return shift lever to neutral
R
Gear shift lever in reverse while starting
Return shift lever to neutral
P
Park brake applied when gear selected
Return shift lever to neutral and release
park brake
d
Gear shift lever in downshift when starting Return shift lever to neutral
U
Gear shift lever in up shift while starting
Return shift lever to neutral