Buhler 2180 - Manual (Page 267)

SECTION 4 - TROUBLESHOOTING
4-5
TRANSMISSION
PROBLEM POSSIBLE CAUSE CORRECTION
Tractor won’t move after starting Flashing “F” “R”
“P” “U”
or “d”
Transmission operation performed
out of sequence
Return shift control lever to neutral
and release parking brake. See
“Operator Prompts.”
Poor inching control when using
inching pedal
Transmission clutches out of
calibration
Recalibrate transmission clutches
F1, F2 and R
Transmission will not operate Fault code displayed indicating
malfunction
See “Fault Codes ON/OFF” and
contact your authorized dealer
Low transmission oil pressure Low oil supply
Clogged transmission oil filter
Fill system with oil
Replace filter