Buhler 2180 User Manual
Page 28
SECTION 1 - GENERAL INFORMATION
1-10
CONTROLS AND INSTRUMENTS - OVERVIEW OF LOCATION AND FUNCTION
The information on the following pages identifies,
locates and briefly describes the function of the
controls and instruments located in the cab.
The controls have been divided in to the following
four areas:
1. Forward operator controls
2. Foot and floor controls
3. Overhead controls
4. Right side console controls
IMPORTANT: The following information in this
section provides a general overview of location and
function but does not provide detailed operational
information. Thoroughly read Section 2 - “Operation”
for details on how to use the controls and read the
instruments before operating the tractor.
WARNING
Do not operate the tractor until you are
thoroughly accustomed with the location and
operation of all controls.