Buhler 2180 - Manual (Page 147)

SECTION 2 - OPERATION
2-101
FLEXIBLE LINK ENDS
Attaching Position
Pull the lock pin, 1, to release the link end, 2, from the
lower link, 3. Extend the link ends to make connecting
to the implement easier.
NOTE: Illustrations show two renditions of the lower
link assembly.
Operating Position
Secure the link ends to the equipment, then carefully
inch the tractor rearwards until the flex link ends, 1,
lock in the closed position and the lock pins, 2, lock
in place.
Attach the top link after flex ends are locked in the
lower links.
NOTE: Illustrations show two renditions of the lower
link assembly.
IMPORTANT: Before transporting or operating the
equipment, make sure the flexible link ends are
locked in the operating position. Remove the
drawbar if it interferes with close-mounted equip-
ment.
150
1
2
3
151
152
2
1
153