Buhler 2180 - Manual (Page 225)

SECTION 3 - LUBRICATION AND MAINTENANCE
3-37
EVERY 300 HOURS
OPERATION 41
CHECK SAFETY CAB MOUNTING BOLT
TORQUE
Check the torque of the cab mount bolts and the
mount bracket bolts. The specified torque figures are:
Cab mount bolts: 217 N·m (160 ft.-lbs.).
Mount bracket to transmission bolts: 239 N·m (177
ft.-lbs.).
Mount bracket to rear axle bolts:
Model 2145 306 N·m (226 ft.-lbs.)
Models 2160, 2180, and 2210:
239 N·m (177 ft.-lbs.).
FRONT CAB MOUNTS - ALL MODELS
Remove the sill plate, 1, and fold back the floor mat,
2, to access the front cab mounting bolts. Torque
mount bolts, 3, as specified. Repeat on the other
front mount.
4. Cab mount bracket
5. Mount bracket to transmission bolts
64
REAR CAB MOUNTS - MODEL 2145
Torque bolts as specified.
1. Cab mount to bracket bolt
2. Mount bracket to rear axle bolts
65