Buhler 2180 User Manual
Page 59
SECTION 2 - OPERATION
2-13
The following information details the operation and
programming of the electronic instrument cluster
(EIC).
AUDIBLE ALARM
An audible alarm will sound when a warning light
illuminates or a bar graph indicates a malfunction.
The alarm will alert the operator that a malfunction
has occurred.
Depending on the severity of the malfunction, the
alarm will sound as follows:
Non-Critical Alarm - An audible alarm sounds for one
second only. The tractor will continue to operate, but
the cause of the alarm should be investigated and
corrected.
Critical Alarm - A continuous pulsating tone will
sound until the malfunction is corrected or the engine
is switched off. The alarm will sound and the engine
“STOP” message, 1, will flash in the center display for
30 seconds before automatic engine shutdown
occurs. The cause of the malfunction should be
located and corrected immediately to prevent
damage to the tractor.
20
The audible alarm has a rotary volume control, 1,
located on the left side of the steering column below
the front controls. Rotate the alarm cover to adjust
the volume.
1
21