Buhler 2180 - Manual (Page 31)

SECTION 1 - GENERAL INFORMATION
1-13
6. COLD START AID SWITCH
Depressing the switch, 6, activates an air inlet heater
designed to pre-heat engine intake air to improve
cold starting. A monitoring device prevents the
heater from working when system temperature is
above 14° C (57° F). See “Cold Weather Starting” for
details.
7. MULTI-FUNCTION SWITCH
The stalk-type switch, 7, operates the horn, turn
signals, headlight flash and is also used to select HI
or LOW beam. See “Lights and Accessory Power” for
details.
21
8. ROTARY BEACON SWITCH (If Equipped)
The switch, 8, controls the operation of the beacon.
Push the top of the switch to operate the rotary
beacon. Push the bottom of the switch to turn the
beacon off. See “Lights and Accessory Power” for
details.
Tractors without rotary beacons have a blanking
plate in place of the switch.
9. HAZARD WARNING LIGHT SWITCH
Push the top of the switch, 9, to activate the hazard
lights. Push the bottom of the switch to turn the
hazard lights off. See “Lights and Accessory Power”
for details.
10. MASTER LIGHT SWITCH
The master light switch, 10, has 4 positions.
A= Full counterclockwise is off.
B= Parking lights
C= Headlights and parking lights
D= Work lights, headlights and parking lights. The
work lights are selected by using the touch-sensi-
tive switches on the EIC console. See “Lights and
Accessory Power” for details.
22