Buhler 2180 - Manual (Page 208)

SECTION 3 - LUBRICATION AND MAINTENANCE
3-20
EVERY 50 HOURS
Two Wheel Drive (2WD) Front Axle Grease
Fittings
Operations 11 through 16 cover 2WD front axle
lubrication.
Lubricate by supplying grease through the fittings.
NOTE: Lubricate at 10-hour intervals when
operating in extremely wet, muddy or very dusty
conditions.
Grease Specification: See specifications
OPERATION 11
LUBRICATE 2WD AXLE PIVOT PIN
IMPORTANT: Lubricate until grease appears at each
end of pivot pin.
28
OPERATION 12
LUBRICATE 2WD AXLE BELLCRANK
29
OPERATION 13
LUBRICATE 2WD AXLE STEERING
CYLINDER
30