Buhler 2180 - Manual (Page 210)

SECTION 3 - LUBRICATION AND MAINTENANCE
3-22
EVERY 50 HOURS
Four Wheel Drive (FWD) Standard Steer Front
Axle Grease Fittings
Operations 17 through 21 cover FWD standard steer
front axle lubrication.
Lubricate by supplying grease through the fittings.
NOTE: Lubricate at 10-hour intervals when
operating in extremely wet, muddy or very dusty
conditions.
Grease Specification: Use lithium base EP
high temperature grease available from your
Buhler Versatile dealer.
OPERATION 17
LUBRICATE FWD STANDARD STEER
AXLE PIVOT PIN FRONT
34
LUBRICATE FWD STANDARD STEER
AXLE PIVOT PIN REAR
35