Buhler 2180 - Manual (Page 274)

SECTION 5 - SPECIFICATIONS
5-2
GENERAL DIMENSIONS 2145 2160 2180 2210
(Two wheel drive)
Height to the Top of Cab mm 3080 3080 3080 N/A
(in) (121.3) (121.3) (121.3) N/A
Height to the Top of Exhaust mm 3159 3159 3159 N/A
(in) (124.4) (124.4) (124.4) N/A
Minimum Width mm 2456 2456 2456 N/A
(in) (96.7) (96.7) (96.7) N/A
Minimum Ground Clearance
Drawbar mm 471 471 471 N/A
(in) (18.6) (18.6) (18.6) N/A
Front Axle mm 507 507 507 N/A
(in) (19.9) (19.9) (19.9) N/A
Track Setting
Front Axle Minimum mm 1575 1575 1575 N/A
(in) (62) (62) (62) N/A
Front Axle Maximum mm 2210 2210 2210 N/A
(in) (87) (87) (87) N/A
Rear Axle Minimum mm 1530 1530 1530 N/A
(in) (60.3) (60.3) (60.3) N/A
Rear Axle Maximum
(96″) Hub Out mm 2738 2639 2639 N/A
(in) (107.8) (103.9) (103.9) N/A
(112″) Hub Out mm 3144 3046 3046 N/A
(in) (123.8) (119.9) (119.9) N/A
(120″) Hub Out mm 3251 3251 N/A
(in) (128.0) (128.0) N/A
Overall Length to the
End of Lower Links
Unballasted mm 4997 4997 4997 N/A
(in) (196.7) (196.7) (196.7) N/A)
Ballasted mm 5396 5396 5396 N/A
- Small Weights (in) (212.4) (212.4) (212.4) N/A
- Large Weights mm 5639 5639 5639 N/A
(in) (222.0) (222.0) (222.0) N/A
To Edge of Rear Tire mm 5273 5273 5273 N/A
- Large Weights (in) (207.6) (207.6) (207.6) N/A
Wheelbase: Standard mm 3005 3005 3005 N/A
(in) (118.3) (118.3) (118.3) N/A
Turning Ratio mm 2375 2375 2375 2375
(in) (93.5) (93.5) (93.5) (93.5)
NOTE: The above dimensions are based on standard tractors fitted with the tire sizes as shown:
Front - 2WD 14L - 16.1 14L - 16.1 14L - 16.1 N/A
Rear 480/80R42 480/80R42 480/80R42 N/A
(18.4R42) (18.4R42) (18.4R42)