Buhler 2180 User Manual

Page 282

Advertising
background image

SECTION 5 - SPECIFICATIONS

5-10

NOTE:

Lubricant brand equivalency chart for all season agricultural transmission hydraulic oil:

BRAND

Imperial Oil

Esso

Shell

Texaco

Amoco

Petro--

Canada

Exxon Mobil

SPECIFICATION

Hydraul 56

Donax TD

TDH

2016 (USA)

01055 (Can)

Duratran

424

ENGINE LUBRICANT
It is recommended that an oil which meets API service category CF-4 (preferred), CF-4/SF or CF-4/SG be used.

If API CF-4 oils are not available, the API CE or CE/SF or CE/SG category may be used. For low temperatures

-18° C (below 0° F), an SAE 5W-30 SG/CD may be used.
NOTE : Engines are filled with 10W-30 oil at the factory. The oil should be changed after the first 50 hours

of operation.

Selecting the Right Viscosity for Your Climate
To choose the right viscosity grade, you must consider the temperature in which you will operate your vehicle.

If you regularly operate in temperatures that are consistently above -12° C (10° F), use SAE 15W-40 oil. If you

regularly operate in temperatures that are below -18° C (0° F), use SAE 5W30 and change oil and filter every

150 hours. Select the proper viscosity grade to correspond with the ambient temperature range shown in the

following chart.
IMPORTANT: Using oil quality and/or viscosity grades other than those recommended may result in engine

damage.

-25° C

-18° C

-12° C

15° C

>

<

SAE 5W-30

SAE 15W-40 (Perferred)

SAE 10W-30

>
>

<

<

(-13° F)

(0° F)

(10° F)

(60° F)

OIL CHANGE INTERVAL
NOTE: Engines are filled with 10W-30 oil at the factory. The oil should be changed after the first 50 hours

of operation.
The engine oil change interval is 300 hours under average operating conditions; however, locally available fuel

may have a high sulphur content, in which case adjust the oil change period as follows:
Sulphur Content

Oil Change Period

Below 0.5%

Normal

0.5 - 1.0%

Half the normal

1.0 - 1.3%

One quarter normal

The use of fuel with a sulphur content above 1.3% is not recommended.
Engines operating in temperatures below -12° C (10° F) should have the oil and filter changed every 150 hours

of operation.

Advertising
This manual is related to the following products: