Buhler 2180 - Manual (Page 216)

SECTION 3 - LUBRICATION AND MAINTENANCE
3-28
EVERY 50 HOURS
OPERATION 29
LUBRICATE 3-POINT HITCH LINKAGE
(3 fittings on each vertical link and 2 fittings on
the top link)
Lubricate by supplying grease through the fittings.
NOTE: Lubricate at 10-hour intervals when
operating in extremely wet, muddy or very dusty
conditions.
Grease Specification: Use lithium base EP
high temperature grease available from your
Buhler Versatile dealer.
49
OPERATION 30
LUBRICATE ROLLER DRAWBAR
(IF EQUIPPED)
Lubricate by supplying grease through the fittings.
NOTE: Lubricate at 10-hour intervals when
operating in extremely wet, muddy or very dusty
conditions.
Grease Specification: Use lithium base EP
high temperature grease available from your
Buhler Versatile dealer.
50