Lenze ECSCExxx Power supply module - Manual (Page 118)

Diagnostics
Diagnostics with PCAN−View
Setting all CAN nodes to the "Operational" status
10
l
118 EDBCSXE040 EN 7.0
10.4.2 Setting all CAN nodes to the "Operational" status
How to set all CAN nodes to the "Operational" status:
1. Create the following CAN message under "New transmit message":
2. Select the CAN message in the "Transmit" window and press the <space bar> once
to transmit the CAN message.