Lenze ECSCExxx Power supply module - Manual (Page 13)

Preface and general information
Legal regulations
1
l
13 EDBCSXE040 EN 7.0
1.5 Legal regulations
Identification Nameplate CE designation Manufacturer
Lenze power supply modules are
unambiguously designated by the
contents of the nameplate. Conforms to the EC Low−Voltage
Directive Lenze Automation GmbH
Grünstraße 36
D−40667 Meerbusch
Application as
directed ECSxE series power supply modules
l must only be operated under the conditions prescribed in these Instructions.
l are components
– for the supply of servo inverters with DC bus voltage.
– for installation in a machine.
– for assembly with other components to form a machine.
l are electrical equipment for the installation in control cabinets or similar closed operating areas.
l comply with the protective requirements of the EC Low−Voltage Directive.
l are not machines for the purpose of the EC Machinery Directive.
l are not to be used as domestic appliances, but for industrial purposes only.
Drive systems with ECSxE series power supply modules
l comply with the EC Directive "Electromagnetic compatibility" if they are installed according to the guidelines
of CE−typical drive systems.
l can be used
– at non−public mains.
– in industrial premises.
l The user is responsible for the compliance of his application with the EC Directives.
Any other use shall be deemed inappropriate!
Liability l The information, data and notes in these Instructions met the state of the art at the time of printing. Claims
on modifications referring to power supply modules and components which have already been supplied
cannot be derived from the information, illustrations and descriptions given in these Instructions.
l The specifications, processes, and circuitry described in these Instructions are for guidance only and must be
adapted to your own specific application. Lenze does not take responsibility for the suitability of the process
and circuit proposals.
l Lenze does not accept any liability for damage and operating interference caused by:
– Disregarding the Operating Instructions
– Unauthorised modifications to the power supply module
– Operating errors
– Improper working on and with the power supply module
Warranty l Terms of warranty: See terms of sales and delivery of the Lenze Automation GmbH.
l Warranty claims must be made to Lenze immediately after detecting the deficiency or fault.
l The warranty is void in all cases where liability claims cannot be made.