Lenze ECSCExxx Power supply module - Manual (Page 14)

Safety instructions
General safety and application notes for Lenze power supply modules
2
l
14 EDBCSXE040 EN 7.0
2 Safety instructions
2.1 General safety and application notes for Lenze power supply modules
(acc. to Low−Voltage Directive 2006/95/EC)
For your personal safety
Disregarding the following basic safety measures may lead to severe personal injury and
damage to material assets!
ƒ Only use the product as directed.
ƒ Never commission the product in the event of visible damage.
ƒ Never commission the product before assembly has been completed.
ƒ Do not carry out any technical changes on the product.
ƒ Only use the accessories approved for the product.
ƒ Only use original spare parts from Lenze.
ƒ Observe all regulations for the prevention of accidents, directives and laws
applicable on site.
ƒ Transport, installation, commissioning and maintenance work must only be carried
out by qualified personnel.
– IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC−Report 664 or
DIN VDE 0110 and national regulations for the prevention of accidents must be
observed.
– According to the basic safety information, qualified, skilled personnel are persons
who are familiar with the assembly, installation, commissioning, and operation of
the product and who have the qualifications necessary for their occupation.
ƒ Observe all specifications in this documentation.
– This is the condition for safe and troublefree operation and the achievement of the
specified product features.
– The procedural notes and circuit details described in this documentation are only
proposals. It is up to the user to check whether they can be transferred to the
particular applications. Lenze Drives GmbH does not accept any liability for the
suitability of the procedures and circuit proposals described.
ƒ ˘Depending on their degree of protection ˘, Lenze power supply modules and their
accessory components can be live during operation. Surfaces can be hot.
– Non−authorised removal of the required cover, inappropriate use, incorrect
installation or operation, creates the risk of severe injury to persons or damage to
material assets.
– For more information please see the documentation.
ƒ High amounts of energy are produced in the power supply module. Therefore it is
required to wear personal protective equipment (body protection, headgear, eye
protection, ear protection, hand guard).