Lenze ECSCExxx Power supply module - Manual (Page 95)

Configuring system bus (CAN)
Assignment of the control word
8
l
95 EDBCSXE040 EN 7.0
8.8 Assignment of the control word
Control word to the power supply module (display in C0130)
Byte Bit Name Meaning
LOW
0 STE_TOGGLE
Toggle bit: Bit state change as a "sign of life" of the
control
1 STE_RESET
0:
1: Reset fault message
Active fault message
2 STE_KSB
0:
1: No short−circuit braking (KSB)
Carry out short−circuit braking (KSB)
3 STE_REGLERFREIGABE
0:
1: X6/DO1 always LOW
X6/DO1 is HIGH if the power supply module is ready for
operation and the input X6/DI2 is HIGH.
4
Free ...
7
HIGH
8
Reserved ...
10
11
Free ...
15