2 mounting steps, Mounting steps – Lenze ECSCExxx Power supply module User Manual
Page 27
Advertising
![background image](/manuals/566199/27/background.png)
Mechanical installation
Mounting with fixing rails (standard installation)
Mounting steps
l
27
EDBCSXE040 EN 7.0
4.2.2
Mounting steps
Proceed as follows to mount the power supply module:
1. Prepare the fixing holes on the mounting surface.
– Use the drilling jig for this purpose.
2. Take the fixing rails from the accessory kit in the cardboard box.
3. Push the rails into the slots of the heatsink:
– From above: push in the long side.
– From below: push in the short side.
4. Attach the power supply module to the mounting surface.
Advertising
This manual is related to the following products: