Rockwell Automation 22C PowerFlex 400 AC Drive FRN 1.xx - 7.xx - Manual (Page 121)

Programming and Parameters 3-63
PowerFlex 400 Adjustable Frequency AC Drive FRN 1.xx - 7.xx User Manual
Publication 22C-UM001I-EN-P
Advanced Display Group (continued)
d312 [Fault 2 Time-hr] Related Parameter(s): A195 , d316
Displays the value of the d316 [Elapsed Time-hr] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr
d313 [Fault 2 Time-min] Related Parameter(s): A195 , d317
Displays the value of the d317 [Elapsed Time-min] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1 Min
d314 [Fault 3 Time-hr] Related Parameter(s): A195 , d316
Displays the value of the d316 [Elapsed Time-hr] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr
d315 [Fault 3 Time-min] Related Parameter(s): A195 , d317
Displays the value of the d317 [Elapsed Time-min] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1 Min
d316 [Elapsed Time-hr] Related Parameter(s): A195 , d310 , d312 , d314
Displays the total elapsed powered-up time (in hours) since timer reset. The timer stops when it
reaches maximum.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr
d317 [Elapsed Time-min] Related Parameter(s): A195 , d311 , d313 , d315
Displays the total elapsed powered-up time (in minutes) since timer reset. The timer will increment the
hour parameter when appropriate.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1 Min