Rockwell Automation 22C PowerFlex 400 AC Drive FRN 1.xx - 7.xx - Manual (Page 88)

3-30 Programming and Parameters
PowerFlex 400 Adjustable Frequency AC Drive FRN 1.xx - 7.xx User Manual
Publication 22C-UM001I-EN-P
T091
Options
(Cont.) 6 “FB-SP>WakLvl” PID Feedback Display minus PID Setpoint Display above
wake-up level.
If (d328 [PID Fdbk Display] - d304 [PID Setpnt Displ]) > T080
[Wake Level], then wake is enabled.
7 “SP-FB>WakLvl” PID Setpoint Display minus PID Feedback Display above
wake-up level.
If (d304 [PID Setpnt Displ] - d328 [PID Fdbk Display]) > T080
[Wake Level], then wake is enabled.
8 “AI1 > WakDev” Wake enabled from Analog Input 1 above PID Setpoint
Display plus wake deviation.
If d305 [Analog In 1] > (d304 [PID Setpnt Displ] + A203 [Wake
Deviation]), then wake is enabled.
9 “AI1 < WakDev” Wake enabled from Analog Input 1 below PID Setpoint
Display minus wake deviation.
If d305 [Analog In 1] < (d304 [PID Setpnt Displ] - A203 [Wake
Deviation]), then wake is enabled.
10 “AI2 > WakDev” Wake enabled from Analog Input 2 above PID Setpoint
Display plus wake deviation.
If d306 [Analog In 2] > (d304 [PID Setpnt Displ] + A203 [Wake
Deviation]), then wake is enabled.
11 “AI2 < WakDev” Wake enabled from Analog Input 2 below PID Setpoint
Display minus wake deviation.
If d306 [Analog In 2] < (d304 [PID Setpnt Displ] - A203 [Wake
Deviation]), then wake is enabled.
12 “CFrq>WakDev” Wake enabled based on drive command frequency above
PID Setpoint Display plus wake deviation.
If b002 [Commanded Freq] > (d304 [PID Setpnt Displ] - A203
[Wake Deviation]), then wake is enabled.
13 “CFrq<WakDev” Wake enabled based on drive command frequency below PID
Setpoint Display minus wake deviation.
If b002 [Commanded Freq] < (d304 [PID Setpnt Displ] - A203
[Wake Deviation]), then wake is enabled.
T080 [Wake Level]
T080 [Wake Level]
T091 [Wake Sel]
= 6 “FB-SP>WakLvl”
PID Feedback
PID Setpoint
T091 [Wake Sel]
= 7 “SP-FB>WakLvl”