Rockwell Automation 22C PowerFlex 400 AC Drive FRN 1.xx - 7.xx - Manual (Page 51)

Start Up 2-3
PowerFlex 400 Adjustable Frequency AC Drive FRN 1.xx - 7.xx User Manual
Publication 22C-UM001I-EN-P
Operator Keys
Integral Keypad
Key Name Description
Escape Back one step in programming menu.
Cancel a change to a parameter value and exit Program
Mode.
Select Advance one step in programming menu.
Select a digit when viewing parameter value.
Up Arrow
Down Arrow Scroll through groups and parameters.
Increase/decrease the value of a flashing digit.
Enter Advance one step in programming menu.
Save a change to a parameter value.
Digital Speed
Increment and
Decrement Arrows Used to control speed of drive. Default is active.
Control is activated by parameter
P038 [Speed Reference] or
P042 [Auto Mode].
Run/Start & Hand (1) Used to start the drive. Default is Hand mode as controlled by
parameter P042 [Auto Mode].
Control is activated by parameter
P036 [Start Source] or
P042 [Auto Mode].
Auto (1) Used to select Auto control mode.
Controlled by parameter
P042 [Auto Mode].
Stop/Off Used to stop the drive or clear a fault.
This key is always active.
Controlled by parameter
P037 [Stop Mode].
(1) Important: Certain digital input settings can override drive operation. Refer to Start and Speed
Reference Control on page 1-28 for details.