Advanced display group (continued) – Rockwell Automation 22C PowerFlex 400 AC Drive FRN 1.xx - 7.xx User Manual
Page 124
3-66
Programming and Parameters
PowerFlex 400 Adjustable Frequency AC Drive FRN 1.xx - 7.xx User Manual
Publication 22C-UM001I-EN-P
Advanced Display Group (continued)
d330 [Fault 4 Code]
Related Parameter(s):
(With FRN 6.xx and later.)
A code that represents the fourth most recent drive fault. The codes will appear in these parameters in
the order they occur (
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, this parameter will be overwritten by [Fault 3 Code]. The value of this
parameter is then moved to [Fault 3 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d331 [Fault 5 Code]
Related Parameter(s):
(With FRN 6.xx and later.)
A code that represents the fifth most recent drive fault. The codes will appear in these parameters in
the order they occur (
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, this parameter will be overwritten by [Fault 4 Code]. The value of this
parameter is then moved to [Fault 3 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d332 [Fault 6 Code]
Related Parameter(s):
(With FRN 6.xx and later.)
A code that represents the sixth most recent drive fault. The codes will appear in these parameters in
the order they occur (
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, this parameter will be overwritten by [Fault 5 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d333 [Fault 7 Code]
Related Parameter(s):
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters
in the order they occur (
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, this parameter will be overwritten by [Fault 6 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1