Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 118
Advertising
118
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 5
FactoryTalk View ME Configuration
2.
Launch FactoryTalk View Studio software and open your
existing application file.
For this example, the InstantFizz_ME application file is
opened.
3.
Right-click Displays within Graphics folder and select Add
Component Into Application.
4.
Navigate to the HMI Modules folder within the toolkit’s files folder.
Your personal computer’s harddrive path is
C:\Program Files\RA_Simplification\DMAT\B-Files\5-HMI\ME\HMI Modules.
5.
Select the folder representing the type of the first faceplate you desire to add.
For this example, the 01_Machine folder was selected for the PVP1000_Startup_Faceplate file.
Advertising
This manual is related to the following products: