Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 245)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 245
Appendix
E
Create and Add BOM Device Modules
Without the DMAT Wizard
In this appendix you select an initial preconfigured BOM file without using the DMAT Wizard and import
BOM device modules to an existing ProposalWorks file.
Before You Begin
Collect specific application data, for example:
• System Input Voltage
• Ambient temperature and Altitude Specifications
• Transmission Type
• Motor data
• Load Data – Inertia and Cycle Profiles
• Other System Sizing Info
What You Need
• The Drives and Motion Accelerator Toolkit DVD, publication IASIMP-SP017 . For a copy of the DVD,
contact your local Rockwell Automation distributor or sales representative.
• PowerFlex Family Selection Guide, publication PFLEX-SG002 .
• Kinetix Motion Control Selection Guide, publication GMC-SG001 .