Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 285)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 285
Controller, Network, and Device Configuration Without the DMAT Wizard Appendix G
This Module Definition example applies to the PowerFlex 525 EENET drives.
9. Click OK to close the New Module dialog box.
IMPORTANT The PowerFlex 525 drive supports up to four (4) datalinks IN and OUT, but is not required for the PowerFlex 525
faceplate functionality. The Output Current datalink is used to provide a reference/placeholder in the logic of the device
module to scale datalink values accordingly.