Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 133
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
133
FactoryTalk View ME Configuration
Chapter 5
The Goto Display Button Properties dialog box opens.
3.
Click
to browse for the desired display.
For the Widg-O-matic machine application example, the Device 1 button is selected and configured to
launch a faceplate for the Gantry X device.
The display Component Browser dialog box opens.
4.
Select the desired display to launch when this device button is pressed.
For the Widg-O-matic machine application example, the CIPMotion_Faceplate display is selected as it
supports the Gantry X device (Kinetix 6500 drive). Refer to the Determine the required faceplates for your
application based on the Determine the required faceplates for your application based on the table. table.
table on
for faceplate supported devices.
5.
Click OK to close the Component Browser dialog box.