Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 124)

124 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 5 FactoryTalk View ME Configuration
8. Assign the parameters in each of the parameter files.
In each parameter file, there are references to controller links (shortcuts) or specific tag names. The ‘!’
before any text indicates that line is a comment and each parameter file contains instructions on how to
configure it. The ‘#’ before a number indicates a parameterized tag.
For example, in the Widg-O-matic Gantry_X_Axis parameter file Parameter #1 contains the shortcut
name [CLX]. This should match the shortcut name created in your RSLinx Enterprise communication
setup. Parameter #2 represents the tag name for the specific Faceplate AOI, within your Logix Designer
project, which the faceplate requests data from.
The Widg-O-matic Gantry_X_Axis parameter #2 is assigned to the faceplate AOI tag named
Gantry_X_Axis_FP found in the R02_Monitor routine of the P04_Gantry_X_Drive program.
Parameters
Comments