Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 350)

350 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix G Controller, Network, and Device Configuration Without the DMAT Wizard
4. Select E3Plus_Module.L5X or E3Plus_Module_Energy.L5X if energy support is required.
5. Click Import.
The Import Configuration dialog box opens.
6. Enter the desired name for your initial Device in the Final Name field.
In this example, the Final Name is P11_E3Plus.
7. Click Tags within the Import Content organizer.