Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 233)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 233
Add Other Devices to the Equipment Status Faceplate Appendix C
4. Create an Interlocked Pushbutton on toolbar (see example) that will activate visibility of the new Object
Group.
5. Set the Connection or tag tied to this button to {#1.Set_EquipFaceplateAnimation}.
6. Set the button value to the number assigned in the group animation in step 3.
7. Create another Interlocked Pushbutton on the toolbar (Home button in this example) that will activate
visibility of the existing Equipment_Status_Faceplate Group.
The pre-configured visibility value for this group is 0.
8. Repeat step 1 … step 7 for additional faceplate object groups you wish to visually activate by faceplate
toolbar buttons .