Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 135)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 135
FactoryTalk View ME Configuration Chapter 5
10. The Label tab dialog box opens.
11. Type the desired text in Caption field.
For the Widg-O-matic machine application example,
Gantry X is entered.
12. Click OK to save button properties.
The display updates with button changes. Device 1 is now Gantry X.
13. Repeat step 2 … step 12 for each Goto Display Button required for your application.
For the Widg-O-matic machine application example, the four Goto display buttons were configured.
Device Goto Display Button Display Setting Parameter Setting
Gantry X CIPMotion_Faceplate Gantry_X_Axis
Gantry Y CIPMotion_Faceplate Gantry_Y_Axis
Conveyor PowerFlex_753_755_Faceplate Converyor_Drive
Diverter K300_Faceplate Diverter_Drive