Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 348)

348 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix G Controller, Network, and Device Configuration Without the DMAT Wizard
The Configure Components References dialog box opens.
10. Replace _DriveName in the Final Name field with the name of your Kinetix 300 drive.
For the Widg-O-matic application example, Diverter_Drive is the Final Name.
11. Click OK.
The new Device Module Program appears in the Controller Organizer within the Main Task folder.
For the Widg-O-matic application example, the new program named P07_Diverter_Drive appears in
Controller Organizer.
12. Repeat step 1 … step 11 for each Kinetix 300 drive in your machine.