Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 145)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 145
FactoryTalk View ME Configuration Chapter 5
6. Double-click Energy_EquipmentStatus_Parameter to open the parameter editor.
The Energy_EquipmentStatus_Parameter dialog box opens.
7. Configure all nine parameters with your shortcut name and drive name.
The equipment status faceplate display for energy reads data from both the device faceplate AOI tag
(DriveName_FP) and the device energy object AOI tag (DriveName_BEO). The parameters combine
with _FP and _BEO within the faceplate as required.
Each parameter #1…9 corresponds to the device to be displayed in each Equipment Status faceplate Row
#1…9.
You must assign the #1 parameter to a device that includes the Inp_NumRowsVis assignment in its energy
object tag (DriveName_BEO.Inp_NumRowsVis).
The remaining parameters #2…9 must be assigned to valid device names for the Equipment Status
faceplate to operate without errors, even if corresponding Equipment Status faceplate rows are not being
used. It is recommended to fill in the unused parameters with the last valid AOI tag name.