Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 270)

270 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix G Controller, Network, and Device Configuration Without the DMAT Wizard
Follow These Steps
Complete the following steps to configure your Logix5000 integrated motion application.
Device Configuration
page 277
CIP Motion Drive Configuration
page 293
Controller and Network
Configuration
page 271
page 304
Sercos Motion Drive Configuration
page 309
Kinetix 300 Drive Configuration
page 328
Import and Configure Logic Modules
For Kinetix 6500, Kinetix 5500, Kinetix 350,
and PowerFlex 755 CIP Motion Drives
For Kinetix 6200, Kinetix 6000, Kinetix 6000M,
Kinetix 2000, or Ultra3000 Sercos Drives
Optional Step
Complete if sercos drives
are used in your application.
PowerFlex Drive Configuration
page 277
Create a New Project File
page 271
Configure the Ethernet Module
page 273
Configure the Sercos Module
page 274
Save the Project File
page 276
page 328
Import and Configure the
Machine Logic Module
page 332
Import and Configure
Application Logic Modules
page 336
Import and Configure
Device Logic Modules
page 321
E3 Plus Overload Relay with
Communication Auxiliary
Configuration
page 323
SMC-50 Soft Starter Configuration
Start