Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 250
250
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix E
Create and Add BOM Device Modules Without the DMAT Wizard
a. Click File and choose Utilities>Import.
The Import Equipment List from File dialog box opens.
b. Navigate to the 2-BOM Dev folder
within the toolkit’s Files folder.
Your personal computer’s harddrive path is
C:\Program Files\RA_Simplification\DMAT\B-Files\2-BOM Dev.
c. Double-click the 5_Controllers and IO folder.
d. Select the CompactLogix Module-L.prp
or ControlLogix Module-L.prp file based
on the controller family required for your
application.
For the Widg-O-matic machine application example, the ControlLogix Module-L.prp file is selected
for support of the two Kinetix 6500 CIP Motion drives in the system.